« new ICs | Main

April 3, 2006

octava 319 mod

there are some pretty heavy mods you can do to an octava 319. i did some with my keychain swiss army knife, and some pliers.

so first i took off the basket. i was heading for those plastic things over the diaphram. gonna take them off.

i had to unscrew the wire from the center to get the front thing off. but that was no problem. just be carefull you don't stab the diaphram.

added some felt to the white, flat, hard plastic..

then i torn out the inside layer of metal mesh, and the round top.
and put the basket back on. simple!

Posted by trevor at April 3, 2006 11:18 AM